Replacing the fan bracket, The system. see figure 3-14 – Dell DX6000 User Manual
Page 108
108
Installing System Components
Figure 3-14. Removing and Installing the Processor Fan Bracket
Replacing the Fan Bracket
CAUTION:
Many repairs may only be done by a certified service technician.
You should only perform troubleshooting and simple repairs as authorized in
your product documentation, or as directed by the online or telephone service
and support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came
with the product.
1 Align the fan bracket down onto the bracket base so that the mounting
pins fit correctly into the bracket base. See Figure 3-14.
2 Insert the bracket and engage the release levers to lock it in place.
3 If removed, replace the fans in the fan bracket. See "Replacing a Cooling
4 Close the system. See "Closing the System" on page 83.
1
fan bracket
2
release latch
3
fan connector on system board
4
mounting pin
2
1
4
3