Dell DX6000 User Manual
Page 140
140
Installing System Components
CAUTION:
The processor is held in its socket under strong pressure. Be aware
that the release lever can spring up suddenly if not firmly grasped.
9 Position your thumb firmly over the processor socket-release lever and
release the lever from the locked position. Rotate the lever 90 degrees
upward until the processor is released from the socket. See Figure 3-27.
10 Rotate the processor shield upward and out of the way. See Figure 3-27.
Figure 3-27. Installing and Removing a Processor
CAUTION:
Be careful not to bend any of the pins on the ZIF socket when removing
the processor. Bending the pins can permanently damage the system board.
1
socket-release lever
2
processor
3
processor shield
4
notch in processor (2)
5
socket key (2)
6
ZIF socket
6
1
2
4
3
5