Dell DX6000 - Manual (Page 129)

Installing System Components 129
4 Remove expansion-card riser 2. See "Removing Expansion-Card Riser 2"
on page 126.
Figure 3-24. Removing and Replacing the Riser 2 Board
5 Remove the expansion-card riser board:
a Using a Phillips screwdriver, remove the securing screw from the
assembly. See Figure 3-24.
b Slide the riser board off of the four securing tab hooks.
c Lift the riser board from the bracket.
1 expansion-card bracket 2 tab hook (4)
3 tab slot (4) 4 riser 2 board
5 screw
5
1
4
3
2