Dell DX6000 User Manual
Page 51
Advertising
About Your System
51
Timer chip
counter 2 failed.
Faulty system board.
TPM
configuration
operation
honored. System
will now reset.
A TPM configuration
command has been entered.
The system will reboot and
execute the command.
Information only.
TPM
configuration
operation is
pending. Press
(I) to Ignore OR
(M) to Modify to
allow this change
and reset the
system.
WARNING:
Modifying could
prevent
security.
This message displays during
system restart after a TPM
configuration command has
been entered. User
interaction is required to
proceed.
Enter I or M to proceed.
TPM failure.
A Trusted Platform Module
(TPM) function has failed.
Table 1-2. System Messages
(continued)
Message
Causes
Corrective Actions
Advertising