System battery, Replacing the system battery, E "system battery – Dell DX6000 User Manual

Page 143

Advertising
background image

Installing System Components

143

16 Run the system diagnostics to verify that the new processor

operates correctly.

17 See "Running the System Diagnostics" on page 173 for information

about running the diagnostics.

System Battery

Replacing the System Battery

CAUTION:

Many repairs may only be done by a certified service technician.

You should only perform troubleshooting and simple repairs as authorized in
your product documentation, or as directed by the online or telephone service
and support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came
with the product.

WARNING:

There is a danger of a new battery exploding if it is incorrectly

installed. Replace the battery only with the same or equivalent type recommended
by the manufacturer. See your safety information for additional info.

1 Turn off the system, including any attached peripherals, and disconnect

the system from the electrical outlet.

2 Open the system. See "Opening the System" on page 83.
3 Remove the fan bracket. See "Removing the Fan Bracket" on page 107.
4 Locate the battery socket. See "System Board Connectors" on page 180.

CAUTION:

To avoid damage to the battery connector, you must firmly support the

connector while installing or removing a battery.

5 To remove the battery, support the battery connector by pressing down

firmly on the positive side of the connector.

6 Lift the battery out of the securing tabs at the negative side of the connector.

Advertising