Dell DX6000 User Manual
Page 144
144
Installing System Components
Figure 3-28. Replacing the System Battery
7 To install a new system battery, support the battery connector by pressing
down firmly on the positive side of the connector.
8 Hold the battery with the “+” facing up and slide it under the securing
tabs at the positive side of the connector.
9 Press the battery straight down into the connector until it snaps into place.
10 Replace the fan bracket. See "Replacing the Fan Bracket" on page 108.
11 Close the system. See "Closing the System" on page 83.
12 Reconnect the system to the electrical outlet and turn the system on,
including any attached peripherals.
13 Enter the System Setup program to confirm that the battery is operating
properly. See "Entering the System Setup Program" on page 58.
14 Enter the correct time and date in the System Setup program's Time and
Date fields, and re-enter any customized option settings as needed.
15 Exit the System Setup program.
1
positive side of battery connector
2
system battery
3
negative side of battery connector
2
3
1