Removing a hard drive from a hard-drive carrier, Removing a hard drive from a, Hard-drive carrier – Dell DX6000 User Manual
Page 87: See figure 3-5
Installing System Components
87
1 If present, remove the front bezel. See "Removing the Front Bezel" on
2 If a drive blank is present in the bay, remove it. See "Removing a Hard-
Figure 3-5. Installing a Hot-Swap Hard Drive
3 Install the hot-swap hard drive.
a
Press the button on the front of the drive carrier and open the handle.
b
Insert the hard-drive carrier into the drive bay until the carrier
contacts the backplane.
c
Close the handle to lock the drive in place.
4 If applicable, install the bezel. See "Installing the Front Bezel" on page 82.
Removing a Hard Drive From a Hard-Drive Carrier
Remove the screws from the slide rails on the hard-drive carrier and separate
the hard drive from the carrier. See Figure 3-6.
1
release button
2
hard drive carrier handle
2
1