See figure 3-30 – Dell DX6000 User Manual
Page 149
Advertising
Installing System Components
149
8 When the backplane cannot slide upward any farther, pull the backplane
toward the back of the system to remove it from the retention hooks.
9 Lift the board out of the system, being careful to avoid damaging
components on the face of the board.
10 Place the SAS backplane face down on a work surface.
Figure 3-30. Removing and Installing a SAS Backplane
1
drive bays
2
SAS backplane board
3
power cable from system board
4
SAS A cable
5
SAS B cable
6
securing slots (8)
7
securing tabs (7)
8
SAS backplane board release tab
1
7
4
8
3
2
5
6
Advertising