Removing an idrac6 enterprise card, Opening. see figure 3-10, Ated. see figure 3-10 – Dell DX6000 User Manual
Page 99
Installing System Components
99
6 Reinstall all expansion cards in expansion-card riser 1. See "Installing an
7 Close the system. See "Closing the System" on page 83.
8 Reconnect the system and peripherals to their power sources, and turn
them on.
Figure 3-10. Removing and Installing the iDRAC6 Enterprise Card
Removing an iDRAC6 Enterprise Card
CAUTION:
Many repairs may only be done by a certified service technician.
You should only perform troubleshooting and simple repairs as authorized in
your product documentation, or as directed by the online or telephone service
and support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came
with the product.
1 Turn off the system, including any attached peripherals, and disconnect
the system from the electrical outlet.
2 Open the system. See "Opening the System" on page 83.
1
iDRAC6 Enterprise card
2
VFlash media slot
3
VFlash SD card
4
RJ-45 Ethernet port (underneath
card)
5
retention standoff posts (2)
6
iDRAC6 Enterprise card connector
2
6
1
5
4
3