Using house current – Sony GV-500 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
i
¿/Г1-;7а»«ппг«гд1
Using House Current
Use the supplied AC-V30 AC power adaptor.
1
Connect the AC power adaptor to a wall outlet.
2
Insert the connecting cord supplied with the AC-V30 AC power
adaptor into the DC OUT jack on the AC power adaptor.
3
Align the right side of the connecting plate with the white line on the
video TV recorder, and while pressing it, slide it in the direction of the
► mark.
1
AC-V30
To remove the connecting plate
While sliding the ВАТТ knob, slide out the connecting plate.
CAUTION
TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS POLARIZED AC PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE
FULLY INSERTED TO PREVENT BLADE EXPOSURE.
•
• The unit is not disconnected from the AC power source as long as it is connected to the wall
outlet.
• One blade of the plug is wider than the other for the purpose of safety and will fit into the wall
outlet only one way. If you are unable to insert the plug fully into the outlet, contact your
dealer.
• While the unit is in use, particularly during charging, keep it away from AM receivers and video
equipment because it will disturb AM reception and video operation.
16