To check the contents of preset timer setting, To change the timer settings, To cancel the timer setting – Sony GV-500 User Manual
Page 46
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To Check the Contents of Preset Timer Setting
When the unit is in timer recording standby mode or operating on timer recording
Press TIMER CHECK. The TIMER REC display showing the preset timer settings will appear on
the screen. If the unit is turned off, turn on the unit, then press TIMER CHECK.
The TIMER CHECK display will appear.
To turn off the TIMER REC display, press TIMER CHECK again.
ntERCHKK
To Change the Timer Settings
When the unit is in timer recording standby mode or operating on timer recording
1
Release the timer recording mode by pressing TIMER REC ON/OFF.
2
Turn on the unit.
3
Preset timer again. (See the procedures on page 41 to 43.)
To Cancel the Timer Setting
Release the timer recording mode by pressing TIMER REC ON/OFF.
Turn on the unit and select TIMER SET in the menu display. In the TIMER SET display, press
Q / Q so that P- points to the setting to be cleared and press TIMER CLEAR. The setting will
be cleared and -/- indication resumes.
To Operate the Unit After Setting the Timer
1
Press TIMER REC ONADFF.
The TIMER REC lamp goes off.
2
Operate the unit.
3
After using it, press TIMER REC ONADFF to turn on the TIMER REC lamp.
The unit turns off and enters timer recording standby nrade.