Sony GV-500 User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1 Turn the power on of this
unit and the recording
While pressing the ««lu’iTL.'iSw
green button, slide
POWER to the right_
Select the line input on the VCR.
Select the recording mode (SP/LP) on the VCR.
Activate EDIT function of this unit and the VCR if the VCR has this function
(See page 60).
5 Locate the playback start point on this unit
and set it to the playback pause mode.
Locate the recording start point on recording VCR and set it to the recording
Press the pause buttons on both units. Then press the PAUSE button again at the
point you want to stop editing.
8 To edit more scenes, repeat steps 5 to 7.
9 After editing is completed, press the stop buttons on both units.