AVer SA series - Manual (Page 108)

100
Setup preset position and Use Preset
 Setup Preset Position
1. Press button and the Camera preset setup screen will appear on LCD screen.
2. Using numeric key pad to enter the preset position number. The numbers of preset position depends on
the support of the PTZ camera.
3. Press Enter button to confirm the setting.
4. When the “Complete” message appears on the LCD screen, the setting is done.
 Using the Preset Button
By pressing the button and enter the preset position number, the camera will move to the preset
position that user has setup.
1. Press button and the Preset position screen will appear on LCD screen.
2. Using numeric key pad to enter the number of the preset position and press the Enter button.
3. When the “Complete” message appears on the LCD screen, the function is completed.