AVer SA series - Manual (Page 88)

80
4.1.3.2 Hardware Installation
Connecting the DVR Server through the USB port
The following is an example of System controller installation. This way of installation is suitable for all series
of SA DVRs.
1. The DVR server should power on and DVR program is executed.
2. Plug the power cord of the System Controller into power outlet.
3. And then, plug the USB cable that is attached on the System Controller to the USB port of the DVR
server.
4. The DVR system will install the drives automatically when the System Controller connects to the DVR
system. Please wait a while for driver installation completing.