AVer SA series - Manual (Page 248)

240
10.3 Remote Backup
Remote Backup is purely for backing up the *.dvr file from the DVR sever. You can select between Auto
Backup and Manual Backup. Auto Backup continuously archives one hour of the recorded data at a time,
starting from the specified date. As for Manual Backup, it only archives the recorded data of selected date.
i - Please make sure the UAC function has disabled before install Remote setup.
- To disable UAC, please go to User Account setting in Control Panel to turn
“User Account
Control “off . If UAC doesn ’t disable, it might cause abnormal operation of DVR system.
- To back up the data, you must have at least 2G hard disk space.
To back up the recoded data from the DVR server:
1. Make sure you are connected to the internet.
2. Click Start >> Programs >> DVR >> Web Tool >> Remote iBackup
3. To add the DVR server, click Add
4. In the Add New DVR windows, enter the Name, IP, user ID, and password.
5. Select the Backup mode:
Auto Backup mode: the backup will automatically execute when the setup is completed
- In Begin Date drop down calendar, select the date from where to start
- Click Add to set the storage path.
- Click Delete to remove the selected storage path.
- Click Schedule to select/unselect the time you want to backup. The red block turns white when it is
unselected.
- Enable/disable Disk Recycle check box, to automatically overwrite the oldest file when there is not
enough free space to backup the file.