AVer SA series - Manual (Page 188)

180
Name Function
(13) Event Log Show the record of activities that take place in the system. To filter the records, select and
click the option button to only display Event, System, Operation, Network or POS.
(14) Visual Search Search from a specific camera by Date, Hour, Minute, 10 Seconds and Second. (See also
Chapter 3.9 )
(15) Find Next Search for the next event or changes in the motion detector frame. You can use this when
you are using Intelligent Search or Event Search function.
(16) Event Search Search from the recorded activities that take place in the system (i.e., Sensor, Motion,
Video Loss, POS). (See also
Chapter 3.11 )
(17) Intelligent Search Search the changes in the motion detector frame (See also Chapter 3.11 ).
(18) Audio Enable/disable volume
(19) De-interlace To enhance the video quality. Set the de-interlace mode to #1, if you are capturing
motionless picture and #2, if it captures lots of movement.
(20) Watermark To verify the playback video has not been modified (also see Chapter 5.1.1 )
5.1.1 Watermark Verification
QPlayer program can only verify when a single channel in full screen playback mode. To verify the playback
video doesn
’t been modified. Click to verify the playback video.
The checking result is shown as below figure:
i
Watermark verification doesn ’t support on hardware compression products and video that is
recorded from IP camera.