AVer SA series - Manual (Page 155)

147
(8) Video Size
Select the size of the video and click the  button. The higher the size, the larger the file it create. You can
also activate the Enable Deinterlace to enhance the video quality. Set the Enable Deinterlace mode to #1,
if you are capturing motionless picture and #2, if it captures lots of movement.
(9) Mask/Shield Edit
Mask, mark an area on the screen to disregards the motion in the marked area and to only monitor outside
the marked area. As for the Shield, it covers an area on the screen and the covered area would not be visible
on the screen and recorded. (see also
Chapter 4.3.1 and 4.3.2 )
(10) Individual Adjustment
To adjust recording frame rate of each channel. Max available frames are total frames that can be used.
Used frames are the frames that have been used. Select the video size and scroll the bar to adjust frame
rate of camera. Click OK to save the configuration. To cancel, click Cancel.