Set the timer – AVer SA series User Manual
Page 125
Advertising
117
10. When user sees the
“Complete” message, it means the operation is
done.
Set the Timer
Set a period time for System Controller idling over the setup time to switch to rest status.
1. At main menu screen, press the
button to enter Controller
setup screen.
2. Press
button to enter System Lock screen.
3. Press
button to enter the Timer setup screen.
4. Press
button to enable the timer. Press again will disable the
timer.
5. Press s
and
button to adjust the time.
6. Press
button to confirm the setting. To cancel, press
button.
Advertising