AVer SA series - Manual (Page 193)

185
7.1.1 To Setup Remote System Setting
There are two type of remote setup mode – Basic Setting and Advance Setting. Select the setup mode and
click OK to enter setup window.
7.1.1.1 Basic Setting
Click OK to exit and save the setting and Cancel to exit without saving the setting. The setting here applies
to Remote DVR only.
(1)
(2)
(3)
(4)
(5)
(6)
(8) (7)
(1) Camera Name
Select the camera you want to adjust the settings.
(2) Enable
Set to enable/disable the selected camera. When there is no video source on the camera, we suggest
disabling it so that the system won’t detect it as video loss error.
(3) Camera Setting
- Display
Enable/disable to show the video. Even if the video of the selected camera is hidden you can still
record the video and preview it in playback mode.
- Name
Change the camera name.
- Description
Add a short comment.
(4) Video Adjustment
Adjust the Brightness, Contrast, Hue and Saturation of the selected camera.
(5) Auto Brightness Control
Automatically adjust the brightness.