AVer SA series - Manual (Page 92)

84
4.1.3.3 Using the System Controller for the First Time
For the first time using the System Controller, please select the model of System Controller in DVR server.
Follow the below steps to select the model:
1. Start up the DVR program.
2. Click Setup.
3. Select System, the System Setting windows will appear.
4. Click Detail that is next to the System Controller selection.
5. Mark Enable check box to enable the function of the system controller.
6. Select the Model as System Controller Pro (USB connection) or System Controller Pro 485(RS485
connection). When DVR server has detected the System Controller device, user should see the model
name System Controller Pro in drop-down list.
7. For System Controller Pro 485 model, user needs to select the connection Port. If there is more than on
DVR systems are connecting with System Controller, user can assign a DVR ID for the DVR system as a
control identity.
8. Click OK to complete the setting.
9. If the setting is complete, the LCD of System Controller should display like following figure.