AVer SA series - Manual (Page 119)

111
 Trigger the Relay of IP Camera
1. First, select the camera to configuration. Please refer to Select a
Camera .
2. At main menu screen, press the button to enter Camera Setup
screen.
3. In Camera Setup screen, press button to enter IP-CAM
Output screen.
4. In IP-CAM Output screen, press 1 ~ 4 button to trigger relay 1~4.
5. When user sees the “Complete” message, it means the operation is
done. To go back to previous menu screen, press BACK button. To go
back to main menu, press TOP MENU.