AVer SA series - Manual (Page 77)

69
(1)
(2)
(3)
(5)
(7)
(8)
(4)
(6)
(1) Name: Enter a name to identify the POS.
(2) Protocol: To select the protocol, click Setting button (see
Setup POS Device)
(3) Skip first: Set the number of lines you want to be removed
(4) Start Testing: Click to test POS setting. You will see a test result on the right side of POS Mapping
window.
(5) Port Setting: Select the Local or Remote port to where it is connected.
Local: Select the COM port number which is connected.
Remote: Use the UDP protocol for remote connection if POS system can broadcast
to Internet. Enter the IP address of the remote station.
(6)
Setup…: Set the COM Properties. If you are not sure, please contact your POS service provider.
(7) Map to Channel: Select to which camera number to display the transaction text.
(8) Text Filter: Enter the word you want to be removed.