AVer SA series - Manual (Page 79)

71
6. Click OK
7. Click Save. The configuration will be lost without saving.
8. To modify existing replace rules, double click it.
3. Character Replacement
Set a rule to replace a character or word in POS data. The maximum replacement is 8.
1. Select a POS device from device list
2. Click Add in Replace section
3. Old Data: select the Type(Ascii or Hex) and enter word or character that wants to be replaced
4. New Data: select the Type (Ascii or Hex) and enter the word or character that will replace it in Old Data.
5. Click OK
6. Click Save. The configuration will be lost without saving.
7. To modify existing replace rules, double click it.
4. Adjust Rule Priority
User can set the priority of rule groups. Select the group and click up/down arrow button to move the priority
level. The upper position, the priority is higher.
Setup XML POS Device
XML can only work with the POS data is transmitting in XML format.
 Device: select or add a new device. Only device that supports XML can be configured in here. Click Add