AVer SA series - Manual (Page 30)

22
Chapter 2 Hardware Installation
2.1 Hard Disk Installation for SA6416E/6216E/7416H/7208H
i
SA DVR only support SATA interface of hard disk
1. Pull the locker and open the door of the HDD
drawer.
2. Slide the HDD into the drawer.
3. Push and close the door to let hard disk connected
well.
4. Use the HDD locker key to lock the door. Push up to
lock the HDD drawer.
5. When user see the locker switch to red color, it
means the lock is locked. To open the locker, use
the key and push down.
6. You may now connect all the cables and power on
the DVR unit.