Enable the de-interlace – AVer SA series User Manual
Page 118
Advertising
110
Enable the De-interlace
1. First, select the camera to configuration. Please refer to
2. At main menu screen, press the
button to enter Camera Setup
screen.
3. In Camera Setup screen, press
button to enter De-interlace
screen.
4. In De-interlace screen, press 1 button to if you are capturing motionless
picture. Press 2 button if it captures lots of movement. To disable
de-interlace, press OFF button.
5. When user sees the
“Complete” message, it means the operation is
done. To go back to previous menu screen, press BACK button. To go
back to main menu, press TOP MENU.
Advertising