AVer SA series - Manual (Page 180)

172
4.9.8 To Setup PTZ Preset Point:
Next to the PTZ preset point check box, click Detail. In the Trigger PTZ Preset Setting dialog box, select the
PTZ camera number then select the Enable check box. Select the position of the PTZ camera when the
alarm is activated and ended. For the PTZ camera ended point, user also can select one preset position or
Auto Pan between preset position groups.
4.9.9 To Setup Alarm SOP:
Next to the Alarm SOP check box, click Detail. In the step text boxes, type the standard protocol when the
alarm is activated. When the alarm is activated the Standard Operation Procedure dialog box will appear.
Just click Next to see the next instruction, Back to see the previous instruction, Finish to end and Abort to
terminate.
4.9.10 To Setup CMS Setting
Next to the Send to CMS check box, click Detail. In the CMS Setting, select the camera to enable/disable
sending the video to CMS. Enable All to select all cameras. Then, click OK to accept the new settings and
Cancel to exit without saving.