AVer SA series - Manual (Page 55)

47
3.3.5 To Search Using the Intelligent Search
1. Click on the video screen on where you want to search.
2. Click Intelligent Search. The Intelligent Search text (red) would appear at the lower left corner of the
screen.
3. When the Intelligent Search Setting dialog box and motion detector frame appear, you may adjust the
sensitivity bar and the motion detector frame size and location. To set motion detector frame size and
location, left click and drag on the screen. Then, click OK to start searching. The video search would
stop at the frame that matches the condition. To keep on searching click
.
4. You may also set to search and list all the result. Just check the List box. In the Search Duration section,
set the Begin Time and End Time.
Set the Searching Interval time for in a period of time won ’t
list out the same events. Then, click OK to start searching.
3.3.6 Watermark Verification
Now, SA DVR supports watermark-checking to identify the authenticity of playback video. SA DVR program
can only verify when a single channel in full screen playback mode.
To verify the playback video doesn
’t been modified. Click
to verify the playback video.
i
Watermark verification doesn
’t support on hardware compression products and video that is
recorded from IP camera.