Enabling the autopan – AVer SA series User Manual
Page 109
Advertising
101
Enabling the AutoPan
Enable/disable the PTZ camera move automatically that is based on the selected camera group preset
position number.
1. Press
button and the AutoPan screen will appear on LCD screen.
2. Press the preset position group number button (1-4, 5-8, 9-12, 13-16) and press
button to start
auto pan.
3. When the
“Complete” message appears on the LCD screen, the function is enabled.
4. To stop auto pan, press selected preset position group number again and press
button. When the
“Complete” message appears on the LCD screen, the function is disabled.
Advertising