AVer SA series - Manual (Page 131)

123
4.1.3.17 Operating in PTZ 485 Mode
The PTZ 485 mode is to control the PTZ camera that is directly connected with System Controller through
the RS485 port.
i
To operate PTZ camera, please refer to PTZ Operation .
Switching to the PTZ 485 Mode
Before starting to operate the PTZ camera, please switch to the PTZ 485 mode.
i - The default mode is USB DVR mode
- The USB CMS and 485 DVR mode is not supported in current version.
- If System Controller is connecting with DVR system, please refer to
Switching to USB DVR Mode for
operation description.
1. In main menu screen, press button to enter Controller setup screen.
2. Press button to enter Mode setup screen.
3. In Mode setup screen, press button to switch the mode to 485 PTZ modes.
i
If the password function is enabled, user needs to enter the password for mode switching.
4. Press button to confirm. To cancel the selection, press button. When the “Complete”
message appears on the LCD screen, the mode switch is completed.