AVer SA series - Manual (Page 60)

52
3.7 To Setup the PTZ/IP PTZ Camera
3.7.1 Setup the PTZ Camera
1. In the PTZ control panel, click Setup.
2. When the PTZ Setup dialog box appears, select the camera number and check the Use PTZ box.
3. In the Connection Settings section, select the COMPort where the PTZ camera is connected, PTZ ID
number and PTZ camera protocol. Then, click Save to keep the settings.
4. Use the PTZ control panel and adjust the position of the PTZ camera.
5. In the Preset Setting section, select the preset number to assign a number for the PTZ camera current
position. Set the DwellTime (1-60 sec) for how long the PTZ camera stays in that position before it
moves to the next one. If you want to add description, check the Show Preset Name box and in the
Preset Name text box, type the word. When done, click Save to keep the settings.
6. Repeat step 4 & 5, if you want to save another PTZ camera position.
7. Restore AutoPan Time: set a time period for restoring auto path function after the PTZ camera has
been moved. Mark the check box and set the time period in second.
8. Using Joystick: Enable/disable Using Joystick such as USB joystick device.
9. Show moving direction indicator line: enable/disable to show the direction line when uses mouse
drag on screen in PTZ mode.
10. Iris: To adjust the iris of PTZ camera. It may not support that depends on brand of the PTZ camera.
11. OSD: To allow call out PTZ camera factory
’s OSD setup menu. The OSD setup menu may vary that
depends on the brand of PTZ camera.
12. When is done, click OK to save the setting or Click Cancel, to leave without saving the new setting.
13. When PTZ camera is enabling, user can control PTZ camera by using the mouse and on screen PTZ
control bar.
14. Click on screen PTZ control icon to call out the control bar.