Familiarizing with system controller panel buttons – AVer SA series User Manual
Page 85
77
Familiarizing with System Controller Panel Buttons
System Controller Panel figure
Function
Description
(1)
(Lock)
To lock panel buttons and all operations are lock. Press it to lock and press again to un-lock. If
the system password has been set, please enter the password to un-lock (see also
(2)
(Power)
Lights up when unit is power on.
(3)
(Panic Button)
To trigger the alarm buttons that user has defined (see also
). To
setup alarm button, please refer to Chapter 5.9 step 5. If the alarm button hasn
’t been
defined, there is no any action when alarm button is selected to trigger.
(4)
Playback
Control Buttons
(Jog/Sh
uttle)
Enable/disable the jog/shuttle function. When button lights up is enabling.
(Pause)
To pause the playback.
(Play)
To switch to playback mode and start playback.
(Jog/Shuttle)
- Jog dial (top part): Playback video frame-by-frame that control by user.
- Shuttle ring (lower part): Playback video at faster forward or rewind speed
that control by user.
(5)
(Alarm Log)
To call out the alarm log window. To close alarm log window, press the button again.
(6) LCD Screen
To operate the each function in multi-functions menu and view system related information.
(7)
Multi-function
Buttons
Each button represents a function that is corresponding to the function display on the LCD
screen. Press the button and operate it (see also
Multi-Functions Menu
).
(8)
Enable/disable the PTZ camera move automatically that is based on the selected camera
group preset position number (see also
).