AVer SA series - Manual (Page 177)

169
4.9.4 To Setup Send E-mail Setting:
Next to the Send Email check box, click Detail. In the E-mail Setting dialog box, click OK to exit and save the
setting and Cancel to exit without saving the setting.
(1) Mail Server
Enter the SMTP Server and port. If your e-mail system requires user identification, enable Authentication
check box and enter User ID and Password.
(2) Mail
To check if it is working, click Test Account button.
From: Enter the sender e-mail address.
To and CC: Enter the recipient email address and separate it with comma or a semicolon (;).
Subject: Enter the message title.
Message: Type the message.
(3) Email Notice Setting
- Notice Interval:Set the period of time before it sends another e-mail notice.
- Embedded image:Select the image size and set the number of frames.
- Attach image when sensor is triggered:When the sensor is triggered, the system will capture the
image and send the image to the certain e-mail address with the alarm message.
(4) Modem Dial up Setting
If you are using dial up modem, enable Auto Dial up check box and select the modem name. You may also
set the time to disconnect automatically, just enable the Auto Disconnect after check box and set time.