Kontron TIGW1U Carrier Grade Server - Manual (Page 47)

Kontron Carrier Grade Server TIGW1U
December 2009 Product Guide, rev. 1.3
47
Server Installations and Upgrades—TIGW1U server
3.4.7 Installing Hardware RAID Components
The RAID 5 Kit may include the following components for hardware RAID support:
• Intel ® RAID Activation Key (required for hardware RAID)
• RAID mini-DIMM (required for hardware RAID)
• Intel
® RAID Smart Battery (optional; the Smart Battery is only required to back up
the data in the RAID cache in the event of a system power failure)
The hardware RAID 5 components are installed on the SFP board. See Figure 9 for the
connector locations.
Please refer to the TIGW1U Spares and Configuration Guide for these parts. The RAID
mini-DIMM may also be procured from the list of approved vendors in the Server Board
S5000PHB Tested Memory List at
http://www.cmtlabs.com/mbSearchResults.asp?sManuf=Kontron&sMem=FB-
DIMM&sMN=S5000PHB&oSubmit=Search .
Note: The supported RAID levels are 0, 1, 5, and 10.