Wichtige sicherheitshinweise – Kontron TIGW1U Carrier Grade Server User Manual
Page 92
TIGW1U server—Safety Information
Kontron Carrier Grade Server TIGW1U
Product Guide, rev. 1.3
December 2009
92
Wichtige Sicherheitshinweise
Lesen Sie zunächst sämtliche Warn- und Sicherheitshinweise in diesem Dokument,
bevor Sie eine der Anweisungen ausführen. Beachten Sie hierzu auch die
Sicherheitshinweise zu Kontron-Serverplatinen und -Servergehäusen unter
ontron.com/support/
After you have completed the six SAFETY STEPS
above, you can remove the system
covers. To do this:
1.
Unlock and remove the padlock from the back of the system if a padlock has
been installed.
2.
Remove and save all screws from the covers.
3.
Remove the covers.
4.
Do not operate the system with the chassis covers removed.
For proper cooling and airflow, always reinstall the chassis covers before turning on
the system. Operating the system without the covers in place can damage system
parts. To install the covers:
1.
Check first to make sure you have not left loose tools or parts inside the
system.
2.
Check that cables, add-in boards, and other components are properly
installed.
3.
Attach the covers to the chassis with the screws removed earlier, and tighten
them firmly.
4.
Insert and lock the padlockto the system to prevent unauthorized access
inside the system.
5.
Connect all external cables and the AC power cord(s) to the system.
A microprocessor and heat sink may be hot if the system has been running. Also,
there may be sharp pins and edges on some board and chassis parts. Contact should
be made with care. Consider wearing protective gloves.
Danger of explosion if the battery is incorrectly replaced. Replace only with the same
or equivalent type recommended by the equipment manufacturer. Dispose of used
batteries according to manufacturer’s instructions.
The system is designed to operate in a typical office environment. Choose a site that
is:
• Clean and free of airborne particles (other than normal room dust).
• Well ventilated and away from sources of heat including direct sunlight.
• Away from sources of vibration or physical shock.
• Isolated from strong electromagnetic fields produced by electrical devices.
• In regions that are susceptible to electrical storms, we recommend you plug your
system into a surge suppresser and disconnect telecommunication lines to your
modem during an electrical storm.
• Provided with a properly grounded wall outlet.
• Provided with sufficient space to access the power supply cord(s), because they
serve as the product’s main power disconnect.