Kontron TIGW1U Carrier Grade Server - Manual (Page 67)

Kontron Carrier Grade Server TIGW1U
December 2009 Product Guide, rev. 1.3
67
Server Installations and Upgrades—TIGW1U server
3.5.8 Installing the Battery Insulator
If you are installing the battery on a new server board or replacing it on a server board
that does not have the protective insulator surrounding the battery, use the following
procedure to install the insulator.
1. Fold the battery insulator along the scored bend lines as shown in Figure 55 and
insert the tab in the slot to fasten the insulator.
Figure 55. Folding the Battery Insulator
TS000417
A
B C D