Kontron TIGW1U Carrier Grade Server - Manual (Page 9)

Kontron Carrier Grade Server TIGW1U
December 2009 Product Guide, rev. 1.3
9
December 2009Introduction—TIGW1U server
1 December 2009Introduction
1.1 About this Manual
Thank you for purchasing and using the Kontron Carrier Grade Server TIGW1U.
This manual is for system technicians who are trained and responsible for
troubleshooting, upgrading, and repairing this server. This document provides a brief
overview of the features of the board/chassis, a list of accessories or other components
you may need, troubleshooting information, and instructions on how to add and replace
components on the TIGW1U server.
Note: See the Support web site at http://us.kontron.com/support/ for the latest version of
this manual.
1.1.1 Manual Organization
Chapter 2 provides a brief overview of the TIGW1U server. In this chapter, you will find
a list of the server board features, chassis features, illustrations of the product, and
product diagrams to help you identify components and their locations.
Chapter 3 provides instructions on adding and replacing components. Use this chapter
for step-by-step instructions and diagrams for installing or replacing components such
as the memory, processor(s), front panel board, the battery, and other components.
Chapter 4 provides instructions on using the utilities that are shipped with the board or
that may be required to update the system. This includes how to navigate through the
BIOS (Basic Input/Output System) Setup screens, how to perform a BIOS update, and
how to reset the password or CMOS (Complementary Metal Oxide Semiconductor).
Information about the specific BIOS settings and screens is available in the Intel ®
Server Board S5000PHB Technical Product Specification.
Chapter 5 provides troubleshooting information. In this chapter, you will find BIOS
error messages and POST (Power-on Self Test) code messages. You will also find
suggestions for performing troubleshooting activities to identify the source of a
problem.
1.2 What Your Server Includes
Your Kontron Carrier Grade Server TIGW1U includes the following components:
• One Intel ® Server Board S5000PHB server board
• One 1U chassis
• Three SAS hard disk drive trays
• One optical drive
• A PCI-X* riser card assembly
• DC or AC power subsystem (one hot-swappable PSU; for redundancy a separately
orderable supply is needed) and power distribution board (PDB)