CANOGA PERKINS 9145E NID Software Version 3.0 - Manual (Page 112)

9145E NID Software User’s Manual Class of Service Configuration
CoS Support
98
Figure 10-1 Class of Service Configuration Screen
10.1 CoS Support
NOTE: The instructions in the following paragraphs pertain to both the Ingress and
Egress Class of Service (CoS) Support. Functions 1 through 5 are used for
modifying the Ingress CoS Support settings and functions 6 through 10 are
used for modifying the Egress CoS Support settings.
From the CoS Configuration screen, type 1 or 6 and press Enter. The Ingress or Egress CoS
Support Enabled/Disabled setting is highlighted. Use the Space Bar to cycle the setting between
Enabled and Disabled. Press Enter to lock in the setting.
10.2 Classifier Mapping
The Classifier Mapping screen enables the user to choose the classification mapping and mode
for tagged and untagged packets. While tagged packets are mapped using only Priority Code
Point (PCP), there are three classifications available for untagged packets: IP Procedure, DSCP,
and AF/EF modes.
From the CoS Configuration screen, type 2 or 7 and press Enter. The Ingress or Egress
Classifier Mapping Screen (Figure 10-2) opens.
Canoga Perkins Corp. Ethernet Network Interface Device 01-JAN-1970
Model 9145E-104-0-0 V43.12 F214 05:44:14
------------------------CLASS OF SERVICE CONFIGURATION--------------------------
1) Ingress CoS Support Enabled
2) Ingress Classifier Mapping
3) Ingress Queue Configuration
4) Ingress ED Drop Profile
5) Ingress Queue Statistics
6) Egress CoS Support Disabled
7) Egress Classifier Mapping
8) Egress Queue Configuration
9) Egress ED Drop Profiles
10) Egress Queue Statistics
Select [1-10]:
------------------------------------Messages-----------------------------------