CANOGA PERKINS 9145E NID Software Version 3.0 - Manual (Page 162)

9145E NID Software User’s Manual Service OAM
Maintenance Intermediate Points
148
Figure 11-33. Create a New Maintenance Intermediate Point screen (Y.1731)
11.7.3 Delete a Maintenance Intermediate Point
When you delete a Maintenance Intermediate Point, it is also deleted from the AIS client lists.
1. On the Maintenance Intermediate Point List screen (Figure 11-32), type D and press
<Enter>. The current MIP is highlighted.
2. Press <Space> to scroll through the list and highlight the entry you wish to delete.
3. Press <Enter> to delete the highlighted MIP. You are prompted to confirm the deletion.
11.7.4 Modify a Maintenance Intermediate Point
1. On the Maintenance Intermediate Point List screen (Figure 11-32), type E and press
<Enter>. The current MIP is highlighted.
2. Press <Space> to scroll through the list and highlight the entry to modify.
3. When the MIP you want to modify is highlighted, press <Enter>. The Maintenance Inter-
mediate Point Attributes screen for that MIP (Figure 11-35 for 802.1ag or Figure 11-36 for
Y.1731) opens.
4. To change the Admin Status, type 1 and press <Enter>. Select Enabled or Disabled and
press <Enter>. When a MIP is disabled, it does not process any requests it receives.
Canoga Perkins Corp. Ethernet Network Interface Device 02-JAN-2009
Model 9145E-104-0-0 V3.00 F214 05:15:27
-----------------CREATE A NEW MAINTENANCE INTERMEDIATE POINT--------------------
1) MEG ID 0
2) MIP ID: 0
3) Admin status: Disabled
4) Port: User
Enter number in range 1 - 65535, or (CTRL-L) to select from list.
------------------------------------Messages-----------------------------------