CANOGA PERKINS 9145E NID Software Version 3.0 User Manual
Page 163
Service OAM
9145E NID Software User’s Manual
Maintenance Intermediate Points
149
5. For 802.1ag, to view the VLAN list for that MIP, type 2 and press <Enter>. The MIP’s
Maintenance Association List opens. If you are configuring a Y.1731 MIP, the VLAN num-
ber is displayed on the screen.
6. If you are configuring an 802.1ag MIP, type A to accept the settings and press <Enter>.
Press <Esc> to return to the Maintenance Intermediate Point Attributes screen.
If you are configuring a Y.1731 MIP, go to step
7.
Figure 11-34. Maintenance Intermediate Point Attributes screen (802.1ag)
7. For Y.1731, to change the AIS Transmit interval, type 2 and press <Enter>. Select 1 sec
or 1 min and press <Enter>.
8. To change the AIS priority bits, type 3 and press <Enter>. Type a number from 0 to 7 and
press <Enter>.
9. Type A to accept the settings and press <Enter>. Press <Esc> to return to the Mainte-
nance Intermediate Point Attributes screen.
Canoga Perkins Corp. Ethernet Network Interface Device 02-JAN-2009
Model 9145E-104-0-0 V3.00 F214 05:15:27
------------------MAINTENANCE INTERMEDIATE POINT ATTRIBUTES---------------------
MIP ID: 1 Type: 802.1ag Level: 0
MD ID: 2 Port: User MAC: 00:40:2A:01:EE:23
1) Admin status: Enabled
2) To see VLAN list.
Select [1-2] for attributes:
------------------------------------Messages-----------------------------------