CANOGA PERKINS 9145E NID Software Version 3.0 User Manual
Page 74
9145E NID Software User’s Manual
Port Information
Port Configuration
60
12, Check If VLAN In Translation Table Type 3 and press Enter. Type in the VLAN number.
A message will open at the bottom of the screen, saying either VLAN xx is not in the table
or VLAN xx is mapped to VLAN xx.
13, Toggle View from User/NetworkChanges the screen from the User to Network
Translation Table (Figure 5-8) to the Network to User Translation Table (Figure 5-9) and
back again .
Figure 5-8 Figure 5-8 User Port VLAN ID Translation Table
Canoga Perkins Corp. Ethernet Network Interface Device 29-JAN-2009
Model 9145E-101-3-0 V43.16 F217 10:19:54
----------------------------PORT VLAN ID TRANSLATION TABLE----------------------
Page 1 of 1 Total 0 entries
User <=> Network User <=> Network User <=> Network User <=> Network
---------------- ---------------- ---------------- ----------------
10 <=> 1000
20 <=> 1010
30 <=> 1020
40 <=> 1030
11 <=> 1001
21 <=> 1011
31 <=> 1021
41 <=> 1031
12 <=> 1002
22 <=> 1012
32 <=> 1022
42 <=> 1032
13 <=> 1003
23 <=> 1013
33 <=> 1023
43 <=> 1033
14 <=> 1004
24 <=> 1014
34 <=> 1024
44 <=> 1034
1) Enable VLAN Translation: Yes
2) Add/Delete/Modify VLAN Translation
3) Check If VLAN In Translation Table
Select [1-3]:
CTRL-D: page down, CTRL-U: page up, CTRL-T: toggle view from user/network
------------------------------------Messages-----------------------------------