CANOGA PERKINS 9145E NID Software Version 3.0 - Manual (Page 136)

9145E NID Software User’s Manual Service OAM
Maintenance Domains
122
4. In the Name field, type the name of the new domain and press <Enter>. (You can also
configure an MD without a name. See MD ID 2 in Figure 11-9). The Permissions (Sender
ID) field is highlighted.
5. In the Permissions (SenderID) field, select Chassis, Manage, ChassisManage, or None
and press <Enter>. This value indicates what is to be included in the Sender ID TLV
transmitted in CCMs, LBMs, LTMs, and LTRs:
• None: The Sender ID TLV is not sent. This is the default value.
• Chassis: the Chassis ID Length, Chassis ID Subtype, and Chassis ID fields of the
Sender ID TLV are sent
• Manage: the Management Address Length and Management Address of the
Sender ID TLV are sent
• ChassisManage: the The Chassis ID Length, Chassis ID Subtype, Chassis ID,
Management Address Length and Management Address fields are sent.
Note that in order for a Sender ID TLV to be included in a packet, both Sender applicability
attributes and Permissions attributes must be configured.
6. To accept the new Maintenance Domain settings, type A and press <Enter>. The Modify
Maintenance Domain screen (Figure 11-11) opens.
7. To modify an attribute value, type the number of the attribute and press <Enter>, or press
<Esc> to return to the Maintenance Domain List screen
Figure 11-10. Create a New Maintenance Domain screen
Canoga Perkins Corp. Ethernet Network Interface Device 02-JAN-2009
Model 9145E-104-0-0 V3.00 F214 00:25:46
-----------------------CREATE A NEW MAINTENANCE DOMAIN--------------------------
1) MD ID: 0
2) Level: 0
3) Name:
4) Permissions (Sender ID): None
Enter number in range 1 - 65535.
------------------------------------Messages-----------------------------------