CANOGA PERKINS 9145E NID Software Version 3.0 - Manual (Page 142)

9145E NID Software User’s Manual Service OAM
Maintenance Entity Groups
128
11.5 Maintenance Entity Groups
Maintenance Entity Groups (MEGs) are specific to Y.1731 SOAM procedures. A MEG consists of
the maintenance entities that belong to the same service inside a common SOAM domain. Up to
250 MEGs can be configured in a 9145E NID.
11.5.1 Display Maintenance Entity Groups
To display a list of existing Maintenance Entity Groups, on the SOAM Configuration screen (Fig-
ure 11-6), type 4 and press <Enter>. The Maintenance Entity Group List screen (Figure 11-15)
opens.
Figure 11-15. Maintenance Entity Group List screen
11.5.2 Create a Maintenance Entity Group
1. On the Maintenance Entity Group List screen (Figure 11-15), type A and press <Enter>.
The Create a New Maintenance Entity Group screen (Figure 11-16) opens. The first field,
MEG ID, is highlighted.
2. Type a MEG ID and press <Enter>. The Level field is highlighted.
3. In the Level field, type a number between 0 and 7. Higher numbers correspond to higher
Maintenance Domains, that is, those with the greatest physical reach, with the highest
values for customers' CFM packets. Lower numbers correspond to lower Maintenance
Domains, those with more limited physical reach, with the lowest values for CFM PDUs
protecting single bridges or physical links. Press <Enter>. The Name field is highlighted.
Canoga Perkins Corp. Ethernet Network Interface Device 02-JAN-2009
Model 9145E-104-0-0 V3.00 F214 05:15:27
------------------------MAINTENANCE ENTITY GROUP LIST--------Display 1 - 2 of 2-
MEG ID LEVEL NAME VLAN LIST
100 6 meg100 N/A
101 7 ag-comp-101 900
Select [(F)irst, (P)rev, (N)ext, (L)ast] to change pages,
(A)dd new, (D)elete, (E)dit, ESC to return:
------------------------------------Messages-----------------------------------