CANOGA PERKINS 9145E NID Software Version 3.0 - Manual (Page 87)

System Alarms & Logs 9145E NID Software User’s Manual
System Log
73/(74 Blank)
6.1.1 Log Display Filter Configuration
Sometimes it would be helpful to only look at events that occurred around a certain date,
configuration undertaken by a particular user, just view trap events, etc. The 9145E has a flexible
System Log Display Filter to turn off display of log items that are not of interest to the user.
The Log Display Filter Configuration screen (Figure 6-3) allows the customer to reconfigure the
log display filter settings. From the System Log screen, type S and press Enter. The Log Display
Filter Configuration screen opens. Type the item number of the filter configuration to modify and
press Enter. Use the Space Bar to cycle On/Off and Show/Hide. Type in the Date/Time Filter
Starts and Date/Time Filter Ends time(s), if desired. Type 16 to change filters 4 through 15 to
Show. Type 17 to change filters 4 through 15 to Hide. To return to the System Log, press Esc.
NOTE: Show All and Hide All settings override the settings for items 4 - 15.
NOTE: If the Master filter is set to OFF, no filter changes will be applied.
Figure 6-3 Log Display Filter Configuration screen.
Canoga Perkins Corp. Ethernet Network Interface Device 16-JUN-2009
Model 9145E-101-3-0 V43.16 F217 11:16:44
-------------------------LOG DISPLAY FILTER CONFIGURATION-----------------------
1. Master Filter: On
Date/Time Filters: 2. Date/Time Filter Starts At: 0
3. Date/Time Filter Ends At: 0
User Name Filters: 4. "SYSTEM": Hide
5. "admin": Show
6. Others: Show
User Type Filters: 7. Local: Show
8. Others: Show
Event Type Filters: 9. System: Hide
10. Security: Show
11. Trap: Show
12. Configuration Change: Hide
13. Action: Show
14. Configuration File Change: Show
15. OAM Event: Show
16. Show All Event Types
17. Hide All Event Types
Select[1-17]:
------------------------------------Messages-----------------------------------