CANOGA PERKINS 9145E NID Software Version 3.0 - Manual (Page 20)

9145E NID Software User’s Manual Getting Started
Main Menu
6
Figure 2-2 Login Screen
When you successfully log in, the Main Menu (Figure 2-3) opens. Use the Main Menu to access
all 9145E functions, including setup, diagnostics, and reports.
Refer to “Account Configuration” on page 24 and “Password Configuration” on page 22 for
information about configuring you account and changing your password.
CAUTION:Should you lose both your Username and Password, the unit will
need to be returned to Canoga Perkins for Factory Service and reset.
2.4 Main Menu
Following is a brief description of the Main Menu items.
1. System Configuration - The System Configuration menu is used to view and set values
for system information and TCP/IP management communications parameters.
2. Diagnostics - The Diagnostics menu is used to set up various troubleshooting tests,
including Loopback, Latency/Jitter, PING tests, VLAN Loopback, or Cable Diagnostic, and to
configure and run the Performance Monitoring (PM), Service Availability Monitoring (SAM), and
Protected Link Performance Monitoring (PLPM).
3. Port Information - The Port Information menu is used to ascertain the current conditions
for all ports in the 9145E, to set and view the configuration information for specific ports, check
Link Status and Layer 2 Statistics.
4. System Alarms - The System Alarms screen is used to view current alarm conditions.
5. System Log - The System Log screen displays a list of recent traps, alarms, and events.
6. Utilities - The Utilities menu is used to set-up and display basic functional information.
Canoga Perkins Corp. Ethernet Network Interface Device 29-JAN-2009
Model 9145E-101-3-0 V43.08 F211 11:14:16
--------------------------------------LOGIN SCREEN-----------------------------
-
Please Enter Login Username : admin
Please Enter Login Password : *****
------------------------------------Messages-----------------------------------
-