CANOGA PERKINS 9145E NID Software Version 3.0 - Manual (Page 161)

Service OAM 9145E NID Software User’s Manual
Maintenance Intermediate Points
147
11.7.2 Create a Maintenance Intermediate Point
1. On the Maintenance Intermediate Point List screen (Figure 11-32), type A and press
<Enter>. You are prompted to enter A for 802.1ag or Y for Y.1731.
2. Type A or Y and press <Enter>. The Create a New Maintenance Intermediate Point
screen (Figure 11-33 for 802.1ag or Figure 11-34 for Y.1731) opens. The MD/MEG ID
field is highlighted.
3. Type an MD ID (for 802.1ag) or MEG ID (for Y.1731) and press <Enter>. (To view a list of
MD/MEGs, press CTRL-L, type S to select, and press <Enter>). The MIP ID field is high-
lighted.
4. Type a MIP ID and press <Enter>. The Admin Status field is highlighted.
5. In the Admin status field, select Enabled or Disabled and press <Enter>. The Port field is
highlighted.
6. In the Port field, select User or Network and press <Enter>.
7. To accept the new Maintenance Intermediate Point settings, type A and press <Enter>.
The Maintenance Intermediate Point Attributes screen (Figure 11-35 for 802.1ag or Fig-
ure 11-36 for Y.1731) opens.
8. To modify an attribute value, type the number of the attribute and press <Enter>, or press
<Esc> to return to return to the Maintenance Intermediate Point List screen.
Figure 11-32. Create a New Maintenance Intermediate Point screen (802.1ag)
Canoga Perkins Corp. Ethernet Network Interface Device 02-JAN-2009
Model 9145E-104-0-0 V3.00 F214 05:15:27
-----------------CREATE A NEW MAINTENANCE INTERMEDIATE POINT--------------------
1) MD ID 0
2) MIP ID: 0
3) Admin status: Disabled
4) Port: User
Enter number in range 1 - 65535, or (CTRL-L) to select from list.
------------------------------------Messages-----------------------------------