CANOGA PERKINS 9145E NID Software Version 3.0 - Manual (Page 64)

9145E NID Software User’s Manual Diagnostics
Throughput Test
50
Figure 4-12 Throughput Test Screen
The throughput test can only generate traffic out the network port. The test IP is the only IP
address that can be used for the test. The user has to enable this feature from the license
manager screen (reference Chapter 7, Utilities).
4.7.1 Test Setup
On the Diagnostics menu (see Figure 4-1), select 7) Throughput Test, and press <Enter>. The
Throughput Test screen opens.
1. Target IP Address: Specify the Target 9145E Test IP address.
2. Outer Tag Type: Specify the outer tag type. Use <Space> to select between available
options of:
• CTAG: Customer tag 0x8100.
• STAG: Service provider tag 0x88A8.
3. Outer Tag VLAN ID (0 ~ 4094): Specify Outer Tag VLAN ID between 0 ~ 4094. A VLAN
ID of 0 means the test data packets will not be double tagged.
4. Outer Tag CFI (0 or 1): Specify the Canonical Format Indicator (CFI) value.
5. Outer Tag Priority (0 ~ 7): Set the frame priority level from 0 (lowest) to 7 (highest) to
prioritize different classes of traffic.
6. Inner Tag VLAN ID (0~4094): Specify Inner Tag VLAN ID between 0 ~ 4094. A VLAN ID
of 0 means the test data packets will not be double tagged.
7. Inner Tag CFI: 8. (0 or 1): Specify the Canonical Format Indicator (CFI) value.
Canoga Perkins Corp. Ethernet Network Interface Device 29-JAN-2009
Model 9145E-101-3-0 V43.08 F211 11:20:59
-------------------------------THROUGHPUT TEST---------------------------------
-
1) Target IP Address 172.16.168.6 14) UDP/TCP SRC Port 63587
2) Outer Tag Type CTAG 15) UDP/TCP DST Port 45782
3) Outer Tag VLAN ID 259 16) TCP Sequence # 125987530
4) Outer Tag CFI 0 17) TCP ACK # 25
5) Outer Tag Priority 6 18) TCP Flags 142
6) Inner Tag VLAN ID 2345 19) TCP Window Size 5894
7) Inner Tag CFI 0 20) TCP Urgent Pointer 58741
8) Inner Tag Priority 6 21) Edit Packet Data E.......
9) IP Header DSCP 14 22) Pkt Generation Rate 42%
10) IP Header ECN 3 23) Pkt Generation Duration 25P
11) IP Header DF Bit 0 24) Start Throughput Test
12) IP Header TTL 225 25) Show Last Test Result
13) IP Header Protocol TCP
Select[1-25]: 25
------------------------------------Messages-----------------------------------