CANOGA PERKINS 9145E NID Software Version 3.0 - Manual (Page 167)

Service OAM 9145E NID Software User’s Manual
Configure and View SOAM Statistics
153
Figure 11-39. Maintenance End Point Statistics screen
11.8.2 MIP Statistics
1. To display statistics for all MIPs, on the SOAM Statistics screen (Figure 11-37), type 2 and
press <Enter>. The Maintenance Intermediate Point Stat Table (Figure 11-41) opens.
2. To see details, type D and press <Enter>. The current MIP is highlighted.
3. Press <Space> to select a MIP and press <Enter>. The Maintenance Intermediate Point
Statistics screen for that MIP (Figure 11-42) opens.
4. Type R to reset all the counters to zero.
Canoga Perkins Corp. Ethernet Network Interface Device 02-JAN-2009
Model 9145E-104-0-0 V3.00 F214 05:15:27
-------------------------MAINTENANCE END POINT STATISTICS-----------------------
MEP ID: 1 MA/MEG ID: 2.
CCMs sent 0
CCM with RDI sent 0
CCMs Received 0
CCMs invalid received 0
CCMs discarded due to Sender ID TLV invalid 0
CCMs discarded due to Port Status TLV invalid 0
CCMs discarded due to Interface Status TLV invalid 0
CCMs with sequence errors received 0
CCMs with RDI bit set received 0
LBMs received 0
LBRs sent 0
LBMs with bad Sender ID TLV received 0
Use (N)ext page, (R)eset:
------------------------------------Messages----------------------------------