CANOGA PERKINS 9145E NID Software Version 3.0 - Manual (Page 78)

9145E NID Software User’s Manual Port Information
Port Configuration
64
Figure 5-13 Port Based VLAN Control Screen
1. PBVC Mode - This setting determines which ports are enabled. Use the Space Bar to
select User Port Enabled Only, Net Port Enabled Only, Both Ports Enabled, or Disabled.
A setting of Disabled will allow all VLANs to pass through both ports.
2. Add - This function is used to add one VLAN ID at a time to the screen list. Enter the
VLAN ID you want to add and press Enter. The value must be between 2 and 4094.
3. Add Range - This function is used to add a group of VLAN IDs to the screen list. Enter
the group of VLAN IDs you want to add and press Enter. The value must be between 2
and 4094.
4. Delete - This function is used to remove one VLAN ID at a time from the screen list. Enter
the VLAN ID you want to remove and press Enter. The value must be between 2 and
4094.
5. Delete Range - This function is used to remove a group of VLAN IDs from the screen list.
Enter the group of VLAN IDs you want to remove and press Enter. The value must be
between 2 and 4094.
Canoga Perkins Corp. Ethernet Network Interface Device 29-JAN-2009
Model 9145E-101-3-0 V43.16 F217 10:22:35 -
---------------------------PORT BASED VLAN CONTROL-----------------------------
65 of 100 VLAN IDs
Port Based VLAN Control List:
2 14 24 38 52 64 76
3 15 27 39 53 65 77
4 16 28 40 54 66 90
7 17 29 41 55 69 91
8 18 30 42 56 70 92
9 19 31 43 59 71
10 20 32 44 60 72
11 21 33 49 61 73
12 22 34 50 62 74
13 23 37 51 63 75
PBVC Mode: User Port Enabled Only
Select [(1) PBVC Mode, (2) Add, (3) Add Range, (4) Delete, (5) Delete Range]:
------------------------------------Messages-----------------------------------