Image display, Html sample file [jmainview1.html – Panasonic WV-CU20 User Manual
Page 132
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Image display, camera operation, and alarm image display can be effected on the WWW browser by means of commands
described in the HTML (Hyper Text Mark-up Language) file. The WJ-NT204 employs CGI (Common Gateway Interface) to
carry out these functions. When using a function, the following syntax is used.
Syntax: http;// <IP address >/<CGI function>?<Parameter>=<value> [&<Parameter> = <value>...]
■ Image Display
HTML Sample File [jmainview1.html]
<HTML>
<TITLE><n'!TLE>
<HEAD>
<style TYPE="text/css">
#cVbh323 { LEFT: 50%; POSITION: absolute; TOP: 50%
</style>
</HEAD>
<BODY BGCOLOR=“#FFFFCC">
<CENTER>
<APPLET
code = "JPEGDLLClient.class"
archive = "JPEGDLLClient.jar"
width - *%w"
height = "%h’>
</APPLET>
</CENTER>
</BODY>
</HTML>
Window size (%w, %h) is available (640, 480) or (352, 288).
Note: C%p"): The transmitter unit sets its own address, and the browser issues the address automatically.
m
[T| This is a function to call new images by means of JavaScript.
132