Datettime, D camera menu, Directory – Panasonic WV-CU20 User Manual
Page 80: Alarm table setup, Others, Maintenance, Alarm dialing table setup
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
(D
HOST
To set the address of the host that can be accessed
without user authorization.
® DATETTIME
To set the internal clock of the device.
(D
CAMERA MENU
To set connected cameras (option) by remote control.
(D RECEIVING
Parameters are set such as AUTO/MANUAL reception,
REJECT/ACCEPT reception, etc.
® DIRECTORY
Click this button to open the DIRECTORY SETUP where
you can assign IP addresses, site names to the short
form dialing numbers.
®
ALARM TABLE SETUP
Click this button to open the ALARM TABLE SETUP
where you can assign a maximum of 3 short form dial
ing numbers to each alarm input. The transmitter will
dial these registered numbers sequentially when
receiving an alarm activation.
® OTHERS
The following settings can be made on the window
remotely to the transmitter WJ-NT204.
ONE TOUCH DIALING
RE-CONNECTION
HOST PORT
ON SCREEN DISPLAY
LOCK/PASSWORD
® MAINTENANCE
Opens MAINTENANCE menus where you can set up
settings for auxiliary devices and also cameras con
nected to the device.
(Э RETURN TO MAIN PAGE
To return to the MAIN PAGE.
80